Form Releases |
|
| Chemically reactive |
Thrift Kote, Environmental Release EF, Action Kote |
| Neutralized (buffered) |
Magic Kote, Liner Kote |
| High viscosity (for architectural form liners) |
Liner Kote |
| Biodegradable |
Environmental Release EF |
| |
Evaporation Reducers |
|
| Ready-to-use formulations |
Finishing Aid |
| |
Curing Membranes, ASTM C-309 |
|
| Type I or Type ID, Class A |
Clear Wax Cure, CRD Clear |
| Type I or Type ID,Class A & B |
Resi-Chem Clear |
| Type II, Class A |
CRD White, Spec-Cure White |
| Type II, Class A & B |
Resi-Chem White |
| White Wax Cure |
White Wax Cure, FLDOT White |
| Clear Wax Cure |
Clear Wax Cure |
| White Resin Cure |
Resi-Chem White |
| Clear Resin Cure |
Resi-Chem Clear
Cure |
| Clear Resin Cure with Dye |
Resi-Chem Clear with Dye |
| |
Curing & Sealing |
|
| Solvent-based, 30% solids |
Cure & Seal 30 Plus, Cure & Seal Plus 30 UV |
| Solvent-based, high solids |
Cure & Seal 1315 |
| Water-based Cure & Seal |
Cure & Seal 309 WB, Cure & Seal HS WB, Cure & Seal WB |
| Class B, moderate yellowing (ASTM C-1315) |
Cure & Seal 1315 |
| Class A, non-yellowing (ASTM C-1315) |
Cure & Seal 1315 UV |
| |
Liquid Hardeners |
|
| Sodium Silicates |
Cure & Hard, Quad Cure |
| Magnesium Fluosilicates |
Fluosilicate |
| Silicate / Siliconate |
Buff Hard |
| |
Sealers |
|
| Water-based Acrylic, high solids |
Decorative Sealer WB |
| High Gloss (wet look) |
Decorative Sealer HSN |
| |
Water Repellents |
|
| 10% Silane |
Siloxane / Silane
10% |
| Water-based Siloxane, 10% |
Siloxane / Silane
10% |
| |
Latex Bonders / Additives |
|
| Acrylic, non-reemulsifiable |
Strong Bond |
| Re-emulsifiable polyvinyl acetate (PVA) |
Ready Bond |
| Underlayment Bonder |
Sure Bond |
| |
Cleaners / Strippers |
|
| Citrus degreaser / stripper |
Citrus Cleaner |
| |
Epoxies |
|
| Low viscosity (LV) injection resin |
ResCon Injection Resin |
| Medium viscosity (MV) bonding agent |
Epoxy Bonder MV |
| ICBO Listed epoxy gel chemical anchor |
ResCon 304 |
| Epoxy gel adhesive |
ResCon Gel Anchor |
| Rapid Setting epoxy gel adhesive |
Rescon Gel Anchor FS |
| Low modulus epoxy (mortar for patching/floors) |
Epoxy Binder LV |
| Epoxy grout |
ResCon Epoxy Grout |
| Semi-rigid epoxy control joint sealant |
ResCon Semi-Rigid Joint Filler |
| ResCon Segmental Bridge Epoxy Adhesive |
High Modulus, Epoxy Gel Epoxy Adhesive |
| |
Cementitious Grouts |
|
| General purpose grout |
General-Purpose Grout |
| High-early strength, high flow (ASTM C-1107) |
Ultra-Purpose
Grout |
| High flow grout (ASTM C-1107) |
Multi-Purpose
Grout |
| |
Repair Mortars |
|
| V/O high early strength, polymer-modified |
Vertical Patch |
| Pourable, rapid-setting, HD polymer-modified |
DOT Patch HD |
| Pourable, rapid-setting, polymer-modified |
DOT Patch |
| Rapid-setting repair mortar |
Fast Set 20 |
| Very rapid-setting repair mortar |
Fast Set 5 |
| Rapid-setting hydraulic cement |
Waterstop |
| Very rapid-setting polyurea |
CM 2000 |
| |
Dry-Shake Floor Hardeners |
|
| Quartz |
Hard Top |
| |
Floor / Slab Topping |
|
| Self-leveling interior topping |
Concrete Top HD |
| |
Floor Levelers |
|
| SL floor underlayment |
Concrete Top |
| Trowel-grade underlayment |
Magic Finish |
| |
Masonry / Concrete Coatings |
|
| Interior/exterior resurfacer-Vertical surfaces |
Magic Finish |
| |
Joint Sealants |
|
| Control joint sealant, epoxy |
ResCon Semi-Rigid Joint Filler |
